1/2 HP Chiller Features:

• 1/2 HP Glycol Chiller
• 2850 BTU/hr @ 28F
• Cools up to 4 fermenters at once
• 2 gallon reservoir
• 1 year warranty
• The Mega glycol chiller is suitable for homebrewing and nanobrewing applications down to about 5F depending on the heat load. The built-in controller maintains the temperature of the glycol at the set point. Using one of our recommended glycol pumps you can pump out the chilled glycol to fermenters or brite tanks. There are 8 inlet and 8 outlet 3/8″ tubing fittings in the lid of the reservoir along with an additional hole to run the power cord for each pump.Intended for maintaining fermentation temps/crash cooling, this homebrewing glycol chiller will take your brewery to the next level. Not recommended for dropping wort from boiling temps. It is common practice to either use a 2-stage system -where the chiller pre-cools tap water which cools the boiling wort- or tap water is used first to lower temps to about 100F, then switched to the chiller.

  At around 62 dB(a) when running, it’squiet enough to use in the home brewery and can chill up to 8 fermentation vessels at once. Individual temperature controllers on each fermenter will allow to you keep different temperature set points so you can ferment an ale, a lager, and cold crash another beer all at once.